Інструкція користувача

Launch the program and click on the down arrow next to 'Add Tunnel' in the lower-left corner. Select 'Add empty tunnel... [Ctrl+N]'.

The configuration window for connection to the remote WireGuard server Keenetic - 'Create new tunnel' - will open.

Download wg-client.conf file to your computer. You can save it to your Desktop. Open it in a text editor, for example, in Notepad++.

You will see a ready-made configuration in which you will need to enter the settings for the Windows WireGuard client [Interface] and the remote WireGuard server Keenetic [Peer].

Go back to the 'Create new tunnel' window of step 1 and copy the Windows WireGuard client private key to your computer clipboard from the 'PrivateKey =' field.

The copied WireGuard client private key must be inserted into the ready-made configuration from step 2 into the 'PrivateKey =' line.

Now, set up a remote connection on the previously configured WireGuard server side.

Connect to the router's web interface and go to the 'Internet' - 'Other connections' menu. Click on the previously created WireGuard connection ('WG-S') and then the 'Add Peer' button. Enter the name of the tunnel 'wg-windows-client' in the opened form of the peer settings.

In the 'Public key' field of the web interface, insert the Windows WireGuard client key from step 1, which should be copied from the 'Public key' field to the clipboard.

You can close the 'Create new tunnel' window, click 'Cancel'.

In the 'Allowed IPs' fields, specify the address from which traffic will be allowed to the server in IP/bitmask format — 172.16.82.6/32.

In the 'Persistent keepalive' field, specify the frequency of attempts to check the availability of the remote connection side. Usually, a 10-15 second interval between checks is sufficient. By default, the 'Persistent keepalive' value in peer settings is 30 seconds.

Click 'Save'.

Back to configuring wg-client.conf

[Interface]
PrivateKey = wAG52nyfQEEMOnt1W9Y4SdEOQB8XYaggenoUI6Thz3A=
Address = 172.16.82.6/24

[Peer]
PublicKey = 1YVx+x3C817V9YdhUtpUhzyDLVj5tnK2m//WjFGynm4=
AllowedIPs = 172.16.82.1/32, 192.168.22.0/24
Endpoint = enpwgwrkserver.dynns.com:16631
PersistentKeepalive = 5

Configuring the client [Interface]:

In the 'PrivateKey' field of the [Interface], you have already entered the Windows WireGuard client key in step 4.

Set the IP address in the 'Address' field of the WireGuard client in IP/bitmask format — 172.16.82.6/24 (internal tunnel address). It is possible to use a different subnet, choosing it from the private address range and avoiding overlapping with other subnets configured on these devices.

Configuring the server [Peer]:

In the 'PublicKey' field, insert the public key of the server, which can be copied to the clipboard from WireGuard settings in the web interface of the router:

In the 'Allowed IPs' field, enter the allowed IP addresses in IP/bitmask format — 172.16.82.1/32 (internal server address) and 192.168.22.0/24 (local segment address of the Keenetic router).

In the 'Endpoint' field, enter the public IP address or domain name of the WireGuard server and the listening port on which the WireGuard client will set the connection.

In the 'PersistentKeepalive' field, specify the frequency of attempts to verify the availability of the connection's remote side. Usually, a 10-15 second interval between checks is sufficient.

Press the Ctrl+S key combination or select the 'File' > 'Save' menu.

In the open WireGuard connection settings window from step 6, click on 'Import tunnel(s) from file' and select 'wg-client.conf' on the Desktop, click on 'Open'.

After adding the 'wg-client' configuration to WireGuard, a new connection will appear in the 'Tunnels' list.

Click 'Activate'.

If the setting is correct, you will see a green indicator in front of the 'Status' line.

You can send ICMP packets to its IP address at the Windows command line to verify server availability.

Check the availability of the server web interface (in our example, it is a Keenetic with IP address 192.168.22.1).

The setup is complete.