Skip to main content

Manuale Utente (Inglese)

SFP module compatibility list

Keenetic Titan (KN-1810) model is equipped with an SFP port to connect to Gigabit Ethernet networks via fibre optic cable.

Importante

An SFP module (transceiver) is purchased separately.

SFP-picture.jpeg

Below is a list of modules which functionality was tested in our laboratory or reported by customers.

Vendor

SFP Model

Speed

Technology

Newnets

NS-SFP100-W35S20

100 Mbit/s

Ethernet

Nova

NV-PB-3503S-L2C

100 Mbit/s

Ethernet

Upnet

WDM SFP-1M-20SCDP-A

100 Mbit/s

Ethernet

Gateray

GR-S01-W5520S

100 Mbit/s

Ethernet

MlaxLink

ML-09T

100 Mbit/s

Ethernet

Fibo

FIBO-FT-S01-W3120SD

100 Mbit/s

Ethernet

Kiwi

KIWI-S01-W3120S-D

100 Mbit/s

Ethernet

Osnovo*

SFP-S1SC18-F-1310-1550-I

100 Mbit/s

Ethernet

Osnovo*

SFP-S1SC13-G-1310-1550-I

1 Gbit/s

Ethernet

Osnovo*

SFP-S1SC12-G-1550-1310

1 Gbit/s

Ethernet

Osnovo*

SFP-S5b/F

100 Mbit/s

Ethernet

Eltex

NTU-SFP-100

970 Mbit/s

GPON

Atop

APSB35123CDS20

1 Gbit/s

Ethernet

Atop

AP-B35121-3CS3

1 Gbit/s

Ethernet

MlaxLink*

ML-10T

1 Gbit/s

Ethernet

MlaxLink*

ML-SG-3WDS-31SD

1 Gbit/s

Ethernet

MlaxLink

ML-SG-3WDS-LB31S

1 Gbit/s

Ethernet

SNR

SNR-SFP-W35-20

1 Gbit/s

Ethernet

Gigalink*

GL-OT-SG14SC1

1 Gbit/s

Ethernet

Gigalink*

GL-OT-SGRJ45

1 Gbit/s

Ethernet

Gigalink*

GL-OT-SF14SC1-1550-1310

100 Mbit/s

Ethernet

Gigalink*

GL-OT-SG08SC1-1550-1310-D

1 Gbit/s

Ethernet

Upnet*

SFP-G-03SC

1 Gbit/s

Ethernet

D-Link*

DEM-310GT

1 Gbit/s

Ethernet

D-Link*

DEM-330T

1 Gbit/s

Ethernet

NetLink*

SFP-OT-SC01

100 Mbit/s

Ethernet

NetLink*

SFP-OT-SC01-1550-F20

100 Mbit/s

Ethernet

FoxGate*

SFP-1SM-1310nm-3SC

1 Gbit/s

Ethernet

QTECH*

QSC-SFP20GEW-5531-DDM

1 Gbit/s

Ethernet

QTECH*

QSC-SFP10GEW-1-L

1 Gbit/s

Ethernet

MultiCo*

SFP-1000B 3KM SC WDM Tx1550

1 Gbit/s

Ethernet

MikroTik*

S-85DLC05D

1 Gbit/s

Ethernet

MikroTik*

S-53LC20D

1 Gbit/s

Ethernet

Cisco*

GLC-LH-SM

1 Gbit/s

Ethernet

Cisco*

SFP-GE-T EXT 30-1421-01

1 Gbit/s

Ethernet

OptTech*

OTSFP-LX-D

1 Gbit/s

Ethernet

Gateray*

GR-S1-W553S-D

1 Gbit/s

Ethernet

Huawei*

MA5671A

1 Gbit/s

GPON

MlaxLink*

ML-09R

100 Mbit/s

Ethernet

HS Fiber Communication (HSGQ)*

SFP ONU EPON STICK DFP-34E-2C2

1 Gbit/s

GEPON

Alphabox*

SFP T1310/R1550nm 3 KM SC

1 Gbit/s

Ethernet

SNR*

SNR-SFP-ONU-XPON

1 Gbit/s

GEPON/GPON

ComOnyx*

CO-SFP-SCG20-1513

1 Gbit/s

Ethernet

ComOnyx*

CO-SFP-SCG20-1315

1 Gbit/s

Ethernet

ComOnyx*

CO-SFP-LCG20-1513

1 Gbit/s

Ethernet

ComOnyx*

CO-SFP-LCG20-1315

1 Gbit/s

Ethernet

ComOnyx*

CO-PSFP-LC1G/20-P506

1 Gbit/s

Ethernet

ComOnyx*

CO-PSFP-LC1G/20-P507

1 Gbit/s

Ethernet

Ubiquiti*

SFP UF-RJ45-1G

1 Gbit/s

Ethernet

Ubiquiti*

UF-MM-1G

1 Gbit/s

Ethernet

Ubiquiti*

UF-MM-10G

1 Gbit/s

Ethernet

* — Information was provided by users.

Importante

There are no restrictions in Keenetic routers that allow only certain models of SFP modules to be used. You can install SFP modules from any manufacturer that meet the SFP industry standard and support 100 Mbit/s or 1 Gbit/s transfer rates.

Make sure to ask your ISP for information about the possibility of connection via a particular SFP module!

The transmitting and receiving wavelength characteristic used in the SFP module is also important. For example, if your ISP uses a single-mode optical cable and a module with 1310nm/1550nm wavelength, the other module must be 1550nm/1310nm. This information can be obtained ONLY from your ISP. This information is also relevant for point-to-point connection using single fibre Ethernet SC/LC SFP modules.

Before purchasing and using GPON/GEPON modules, you must be sure that they are compatible with the ISP's equipment, which you can ONLY find out from the ISP itself.

PON and Ethernet technologies use different media access principles. The transmission medium itself is the same - fibre optics.

PON is a TDM (Time Division Multiplexing) technology; the devices use a transmission medium bandwidth based on TDMA (Time Division Multiple Access).

Ethernet uses CDMA/CD (Carrier Sense Multiple Access with Collision Detection), i.e. access to the transmission medium of each device is at a conventionally random point in time, while in PON, it is at strictly defined time slots.

Special PON termination equipment (ONT/ONU) is needed to connect PON devices to the Ethernet network. Keenetic has an SFP GigabitEthernet port. But there is a G(E)PON ONT/ONU in the SFP module form factor. Externally it is not much different from a simple SFP GigabitEthernet module, but the module itself is noticeably larger.

If you use an SFP module that is not on our list, please let us know in the comments to this article or contact our Support Service. We will gladly add it to the list.