Skip to main content

Інструкція користувача

Updating KeeneticOS by a system file

It is recommended to update your Keenetic router's OS through the web interface if an Internet connection is available. After the update, your device will have the most current version of the OS installed. For a detailed KeeneticOS update procedure, please refer to the 'Updating the KeeneticOS from the web interface' instruction.

Below is an example of a manual update of the Keenetic operating system via a pre-downloaded system file without connecting the router to the Internet (i.e. offline).

All the OS system files for different models of Keenetic routers are located on our website in the Download Center.

Select your device model, the 'Download files' page for the selected model will appear. There you will find system files with the bin extension in zip archives.

Важливо

The 'Download Center' section contains KeeneticOS files with the recommended set of components. It is possible to change system components after the system update if you have an Internet connection.

To update the KeeneticOS, go to the 'System settings' page. In the 'System files' section, click on 'firmware'.

upd-file-01-en.png

Then click the 'Replace file' button.

In the appeared window, specify the system file's location for your device (file with the extension 'bin'). You must first extract the system file from the zip archive.

The system file will be uploaded to the Keenetic router.

upd-file-02-en.png

Важливо

Do not turn off the power during the update process!

upd-file-03-en.png

When the update process is complete, your Keenetic will restart automatically and then be ready for use again. The web interface will be unavailable for approximately 1-2 minutes.

Then, on the 'System dashboard' page, make sure that the OS version has changed. It is shown in the 'About the system' information panel.

upd-file-04-en.png

Примітка

Any Keenetic router has dual flash memory with active and backup images of KeeneticOS to ensure trouble-free upgrades. The device first downloads, saves and checks the integrity of the software image in the backup section. The Keenetic device will then write the software and reboot with the updated version of KeeneticOS. Internet access will only be briefly interrupted while the unit reboots.

Підказка