KeeneticOS component description
KeeneticOS supports the following components:
The information is for version 3.7
Languages
English, Français, Deutsch, Italiano, Polski, Português, Русский, Español, Svenska, Türkçe, Українська | A maximum of three web interface languages can be selected in the system. English is a mandatory component. |
Basic components
Initial Setup Wizard | |
Wi-Fi interface | |
DHCP server | |
IGMP/PPPoE proxy service | The IGMP/PPPoE proxy relays IGMP/PPPoE traffic between network segments |
UPnP service | Allows the NAT and the firewall rules on this device to be configured automatically |
SSH server | |
Wi-Fi system controller | |
WPA Enterprise |
System operating mode
Access point/Extender mode | For creating a new Wi-Fi network or to increase the coverage of an existing one |
Adapter mode | For connection of non-Wi-Fi enabled devices to a wireless network |
Repeater/Extender mode |
Internet safety
SafeDNS® | |
AdGuard DNS | |
Cloudflare DNS |
Network functions
PPPoE client | |
PPTP client | |
L2TP client | |
SSTP client | |
802.1X client | Provides login/password-based authentication support over Ethernet networks. |
KABiNET ISP authorizer | This is the replacement for PC-based utility used by subscribers of the KABiNET ISP |
PPTP VPN server | |
SSTP VPN server | |
L2TP/IPsec VPN server | Allows to connect to home network devices using L2TP/IPsec PSK |
IPsec VPN | |
OpenVPN client and server | |
NetFlow Monitor | Gathers information about network traffic forwarded to the Internet and exports flow records to a NetFlow collector |
Application-layer gateway (ALG) for FTP | Provides customized NAT traversal filters to support address and port translation for FTP protocol |
Application-layer gateway (ALG) for PPTP/GRE | Provides customized NAT traversal filters to support address and port translation for PPTP/GRE protocols |
Application-layer gateway (ALG) for RTSP | Provides customized NAT traversal filters to support address and port translation for RTSP protocol |
Application-layer gateway (ALG) for SIP | Provides customized NAT traversal filters to support address and port translation for SIP protocol |
Application-layer gateway (ALG) for H.323 | Provides customized NAT traversal filters to support address and port translation for H.323 protocol |
Application-layer gateway (ALG) for ESP | Provides customized NAT traversal filters to support address translation for the ESP protocol |
IPv6 | |
EoIP tunnelling | |
GRE tunnelling | |
IP-IP tunnelling | |
Wireguard VPN | |
IKE client | Allows to establish IKEv1/IKEv2 client connections from this device |
Utilities and services
Keenetic mobile application | Provides remote management of your Keenetic via the mobile app for Android and iOS |
Cloud-based remote control and KeenDNS | Required for remote management of your Keenetic using the Keenetic RMM and KeenDNS service |
Internet connection status monitoring (Ping Check) | |
Traffic classification engine | Provides detailed insights into network traffic with application and user-level visibility |
Traffic shaper | |
UDP-to-HTTP proxy (udpxy) | Allows home network devices that do not support multicast traffic to watch IPTV channels |
Dynamic DNS (DDNS) client | |
SNMP server | Allows to remotely gather statistics from this device |
Captive portal | Application for creating a public Wi-Fi zone with SMS authentication |
Packet capture | |
DNS-over-TLS proxy | Provides domain names resolution via secure DNS-over-TLS protocol |
DNS-over-HTTPS proxy | Provides domain names resolution via secure DNS-over-HTTPS protocol |
Importante
Due to the different hardware configurations of Keenetic routers, we do not guarantee that all components and specific combinations of components available for a particular model can be installed at the same time. In addition, some operating system components are mutually exclusive and cannot work simultaneously.
You can get the recommended set of components by installing the KeeneticOS firmware for your device from the Download Center.