KeeneticOS 4.2

KeeneticOS release notes for Keenetic Ultra (KN-1810) in the Preview Channel

KeeneticOS releases in this channel provide the chance to be among the first to try the latest updates, performance improvements and new features, all with minimal risk. It is updated roughly every two weeks, with major updates about every two months. Releases here are typically more than a month in advance of release to the general audience in the Main Channel.

Keenetic Ultra (KN-1810) is currently in the Standard Updates support period and receives regular software updates, including security enhancements, new features, operating system updates, and bug fixes.

KeeneticOS 4.2 Beta 1

24/07/2024

New

You can now assign Network ports on Extender devices to any configured network segment using the Command Line Interface (CLI). Alternatively, you may wish to disable the Network ports for security reasons. [NDM-3162]
- mws member {member} port {port} [no] access {interface} — assign {port} on a {member} node to access an {interface} segment;
- mws member {member} port {port} [no] disable — disable {port} on a {member} node.
Enhanced software packet processing engine to enable acceleration for traffic with a manually set TTL value. [SYS-1157]

The new IntelliQoS option allows 802.1p priority code point (PCP) mapping for egress packets in the command line interface (CLI). [NDM-3318]
interface {name} vlan qos egress map {priority} {pcp}
- {priority} — NTCE priority queue number. Use 0 to assign the same PCP value to any outgoing packet on the interface;
- {pcp} — set the new value of the 802.1p priority code point.
The implementation of a ZeroTier connection now includes accepting managed routes and DNS servers published on the ZeroTier network controller. [NDM-3319]

A new CLI grep extension is now available to filter the output of the show command. [NDM-3075]
- grep [-A <n>] [-B <n>] [-C <n>] regex — trim the show command output using the regex regular expression.
  -A — number of XML nodes to show after match.
  -B — number of XML nodes to show before match.
  -C — displayed XML cluster depth.
For example:
```
(config)> show interface | grep address

Interface, name = "Home"
          address: 192.168.2.1
             ipv6:

Interface, name = "Guest"
          address: 10.1.30.1
             ipv6:

(config)> show system | grep cpuload

          cpuload: 5
```

A new segment default policy for hosts has been implemented and is now enabled by default. Registered devices with this connection policy assigned will follow the default connection policy of the network segment they are connecting to. [NDM-2237]
- ip hotspot host {MAC} conform — set host with specified {MAC} to follow the current segment's connection policy.
The new application filtering option is now available in the Application traffic analyser service via command line interface (CLI). This option allows to create a filtering profile, add required applications, assign a host or segment to the filtering profile and enable the operation schedule. [NDM-3069]
- ntce filter profile {name} application {application} — add an application to the profile.
- ntce filter profile {name} group {group} — add an application group to the profile.
- ntce filter profile {name} type {type} — set the profile type, which can be permit or deny.
- ntce filter profile {name} description {description} — set the profile description.
- ntce filter profile {name} schedule {schedule} — set the profile schedule.
- ntce filter assign host {host} {profile} — assign a profile to a registered host (MAC address).
- ntce filter assign interface {interface} {profile} — assign a profile to an interface.
The new option to automatically register hosts in the Home segment is now available (enabled by default). You can disable this behaviour using the command line interface (CLI). [NDM-3101]
- ip hotspot auto-register disable — disable automatic host registration for the Home segment.
The new OpenConnect VPN server system component is now available, providing a remote SSL VPN connection to your Keenetic. [NDM-3141]
- oc-server interface {interface} — bind OpenConnect server to an interface.
- oc-server pool-range {begin} {size} — set OpenConnect address pool.
- oc-server static-ip {name} {address} — set static IP address for a user.
- oc-server mtu {mtu} — set OpenConnect server MTU.
- oc-server multi-login — enable multiple connections with the same user account.
- ip nat oc — enable NAT for OpenConnect clients.
- service oc-server — enable OpenConnect service.
The Keenetic Phone Station system component now supports the filtering of incoming calls. [VOX-271]
- nvox sip {id} whitelist {digitmap} — create whitelist for SIP {id} with specified {digitmap};
  for example: nvox sip 1 whitelist +1111x.|+2222x.|2389x.|32756 — allows phone calls with numbers starting from +1111, +2222, 2389 and an 32756 number.
- nvox sip {id} blacklist {digitmap} — create blacklist for SIP {id} with specified {digitmap};
  for example: nvox sip 1 blacklist +3333x. — block phone number starting from +3333.
- nvox sip {id} enable-whitelist — enable whitelist for SIP {id}.
- nvox sip {id} enable-blacklist — enable blacklist for SIP {id}.
- show nvox sip {id} whitelist — display allowlist settings.
- show nvox sip {id} blacklist — display blocklist settings.
The Keenetic Phone Station system now supports import of the phonebook from a file. [VOX-326]
- nvox phonebook import {filename} {mode} — import contacts in the vCard format.
  - filename — *.vcf filename;
  - mode — import mode: replace, overwrite, extend, or duplicate.
- nvox phonebook delete — delete all contacts from the phonebook.
- nvox sip {id} enable-whitelist-phonebook — enable phonebook as an allowlist filter for incoming calls.
- show nvox phonebook — display all phonebook records.

Improved

Improved host detection using EchoReq in the ICMPv6 protocol to ensure correct operation of port forwarding rules for the IPv6 protocol. [NDM-3265]
Optimized the memory consumption of the SMB file and printer sharing system component when using the Cx File Explorer mobile application. [NDM-2927]
Added SMS subsystem support for Fibocom FM350 and Quectel RM500U modem modules. [NDM-3267]
The Phase 2 of the site-to-site IPsec tunnel now supports the SHA512 HMAC algorithm. [NDM-3269]
- crypto ipsec transform-set {name} hmac esp-sha512-hmac — enable esp-sha512-hmac algorithm for transform-set {name}
Added MAC address and registration time information to the name of devices registered automatically. This will help you easily identify and keep track of the devices on your network. [NDM-3253]

A new read/send timeout option allows the session lifetime for Web applications of the KeenDNS proxy service to be set via the command line interface (CLI). [NDM-3157]
- ip http proxy {name} timeout {timeout} — set {timeout} for KeenDNS {name} proxy.
The WireGuard advanced security configuration (ASC) parameters are now available in the command line interface (CLI). [NDM-3202]
- interface {name} wireguard asc {jc} {jmin} {jmax} {s1} {s2} {h1} {h2} {h3} {h4} — set additional ASC parameters for WireGuard {name} tunnel.

Disabling Port Forwarding (ip static) rules now forces matching active sessions to be dropped. [NDM-3067]
Implemented new options to preserve Referer and Origin headers for Web applications of the KeenDNS proxy service in the command line interface (CLI). [NDM-3089]
- ip http proxy {name} preserve-referer — preserve Referer header for {name} of the web proxy rule.
- ip http proxy {name} preserve-origin — preserve Origin header for {name} of the web proxy rule.
A NetFlow monitor system component can now collect IPv6 traffic information and monitor network flows. [NDM-3109]
The MOBIKE extension (RFC 4555) has been enabled for both the IKEv2/IPsec VPN Server and the IKEv2 client. [NDM-3164]

Fixed

In this section:

KeeneticOS updates — Preview Channel

KeeneticOS 4.2

KeeneticOS release notes for Keenetic Ultra (KN-1810) in the Preview Channel

KeeneticOS 4.2 Beta 1

New

Improved

Fixed

Search results